GENERAL:G-300 Acrylic Emulsion Sealer is a water-based, non-flammable, non-yellowing acrylic
sealer that dries within 15-30 minutes. This product is for use as a base coat.
G-300 enhances colors and renews the appearance of all floors.G-300 Acrylic Emulsion Sealer is an
ideal foundation that works equally well on old or new floors. This product is
recommended for asphalt tiles, vinyl, vinyl asbestos, linoleum, terrazzo, on some
porous ceramic tiles and concrete floors.
DIRECTIONS: Remove from flooring all trace of wax, synthetic finish, dirt, soap
film or other substances that might affect penetration or bonding. Rinse
thoroughly and allow to dry. Apply G-300 with a mop as one does a coat of wax
or finish. 1 or 2 coats are recommended. Before recoating, allow floor to dry.
G-300 may easily be removed utilizing regular methods for stripping wax.
STORAGE AND Handling’s avoid product spoilage, do not pour unused
portions back into original container.Keep from freezing not store below 320F.
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
ODOUR AND APPEARANCE: Milky liquid -mild ammonia and polymeric odor
PH: 8.00 ± 0.6
% VOLATILE ( BY VOLUME ): 85-82 %
SPECIFIC GRAVITY: 1.00 ± 0.02 gm/cm3
FREEZING POINT ( 0C ) : 00C
BOILING POINT ( 0C ): 1000C
EVAPORATION RATE: ~ Water
COVERAGE: 1st coat 50-80 sq. meters/liter, 2nd coat 70-110 sq. meters/liter
SOLUBILITY IN WATER ( 200C ): Soluble
VAPOUR PRESSURE ( MM ): < 25 at 200C
COLOUR OF FILM: Colorless
DRYING TIME AT 200C: 15-30 minutes
G-300 Acrylic Emulsion Sealer-18% solids 20 lit