GENERAL: G-2000 Thermoplastic Floor Finish is a unique, revolutionary Thermoplastic Acrylic metal cross linked
copolymer- Polyurethane modified, formulated to give significantly superior total performance
than conventional floor finishes. This product is designed to withstand the friction of Super High
speed floor machines. G-2000 offers outstanding qualities such as: “Wet Look” high gloss,
resistance to black heel marking, scuffing and powdering. Moreover, this product gives good
levelling, fast recoatability and provides an excellent balance of detergent resistance and
removability.
USE: G-2000 is recommended for vinyl asbestos, asphalt tile, terrazzo, linoleum, ceramic,
marble and concrete floors. This product is an ideal floor finish for cafeterias, stores,
supermarkets, elevators, elevator lobbies, banks, schools, hospitals and other locations where
low maintenance factors are primary concern.
The high anti-slip properties make this product an ideal finish for gym floors in school.
DIRECTIONS: Strip floor thoroughly of old wax or finish. Rinse with clean water and allow to
dry. Apply up to three thin coats with a mop allowing approximately 15-25 minutes between coats.
MAINTENANCE: Dust and/or damp mop as required. G-2000 Thermoplastic Floor Finish can be cleaned many times
with a mild or neutral detergent without loss of beauty and protection. The floor may be buffed,
spray buffed or burnished, depending on the system utilized, twenty four hours after application.
CHEMICAL AND PHYSICAL SPECIFICATIONS:
– % Solids by Weight:18.2 ± 0.2
– PH: 8.7 ± 0.5
– Density: 1.015 ± 0.01 at 250C
– Physical apperance: Opaque liquid
– Odour: Polymeric-free from objectionable odour
– Stability-shelf life: Stable(12) twelve months at 210C, (1) one month at 480C
– Freeze-thaw stability: 3 cycles
– Viscosity at 250C: 5-15 CPS(Brookfied)
– Colour of film: Colourless
– Drying time at 210C: 15-25 minutes
– Heel mark resistance: Excellent
– Water resistance: Excellent
– Gloss: Excellent-self polishing
– Coverage: 1st coat 50-80 sq. meters/litre, 2nd coat 70-110 sq. meters/litre
OTHER PROPERTIES: High standards of anti-slip, high resistance to yellowing, resistance to
water spotting and powdering.
G-2000 Thermoplastic Floor Finish-18% solids 20 lit
- G-2000 is a Thermoplastic Acrylic metal cross linked copolymer-Polyurethane modified floor finish.
- It is designed to provide superior performance compared to conventional floor finishes.
- This product is formulated to withstand the friction of Super High speed floor machines.
- G-2000 provides a high-gloss “Wet Look” finish and is resistant to black heel marking, scuffing, and powdering.
- It offers good levelling, fast reloadability, and an excellent balance of detergent resistance and removability.
- Download SDS Sheet here: G-2000
Description
SKU:
505-2082
Categories: Cleaning & Janitorial, Cleaning Chemicals
Tags: black heel marking resistance, Detergent resistance, floor finish, G-2000, high gloss, high speed, Levelling, Polyurethane modified, Powdering resistance, recoatability, Removability, scuffing resistance, Thermoplastic Acrylic
Related Products
Lysol Disinfectant Spray, All in One Kills 99.99% of Viruses & Bacteria
SKU:
505-2017L
Login to see prices
2024 in stock
Luster Sheen-Power Lotion With Pumice Hand Cleaner
SKU:
501-2004-2-1
Login to see prices
2004 in stock
GRIME EATER® Lime Solvent Free with Pumice Hand Cleaner
SKU:
501-2004GE
Login to see prices
2040 in stock
Betco Sure Cure Acrylic Urethane Sealer & Finish, 3.78L
SKU:
505-2022-1
Login to see prices
2000 in stock